ALO Quicke Forks
POA

DESCRIPTION

Manure Fork - For handling of manure and other soft materials

Three advantages make a big difference: Our manure forks have a specially manufactured bottom beam with welded sleeves for the tines that will not be deformed or bent when in use. The tines are fitted before painting the implement – metal touches metal. The tines are tightened to a very high torque. All-in-all this gives you an implement with a long service life.

Manure Fork XL  - For handling of manure and other soft materials for larger machines

The larger Manure Fork XL has the same basic design as the smaller Manure Fork. The fork is a larger heavier design to also accommodate use by smaller wheel loaders or larger front loaders. This XL implement has welded sleeves and forged tines, the same set up as its smaller sibling. The tines are also tightened to a very high torque. All this gives you a heavy duty implement with a long service life.

Stone Fork - Pick up, clean, and transport stones

New range of Stone Forks, three sizes of front loader models and three sizes of wheel-loader models.“Pick up and keep”. The distinctive design provides considerable potential to fill the implement without dropping any of the stones already in the bucket. Mounted at the front end are hardened tines which point slightly downwards. Available with 3-point linkage.

Stone Fork XL - Pick up, clean, and transport stones

New range of Stone Forks, three sizes of front loader models and three sizes of wheel-loader models.“Pick up and keep”. The distinctive design provides considerable potential to fill the implement without dropping any of the stones already in the bucket. Mounted at the front end are hardened tines which point slightly downwards.

Pallet Forks - For pallet handling

The upper support of the back frame is made in one piece. The beam has holes for lateral adjustment and provides secure positioning of the forks. The load is distributed over a large area thanks to the large load-bearing surfaces of the forks. This special design gives you a stable fork that never tilts or wobbles. Naturally, the forks are designed with a wide margin of safety in mind.

Hydraulic Pallet Fork - A more flexible pallet fork

Our high quality hydraulic pallet forks are, in brief, more productive, comfortable and ergonomic. The pallet forks can be purchased either as a complete product in a number of sizes or in an easily retrofitted kit. This solution allows a perfect line of sight from the driver’s cab to precisely position the required distance between the fork tines. The retrofit kit is suitable for all our ISO pallet fork frames manufactured since December 2012.

Square Bale Fork (Standard) - The simple way of handling square and round bales

The Square bale fork is a simple and sturdy implement for both round and square bales. The tines in the lower box section can be installed 80 or 130 cm apart or one in the center section for improved capacity. The Square Bale Fork may be supplied with a U-shaped back extension that supports the top bale as an optional extra. Back extension a safety device that we strongly recommend especially if the loader is non self levelling or the tractor is without cab.

Square Bale Fork (Safety) - The safer way of handling square bales

The lower box section of the Square bale fork is hinged and this is an important safety detail. Firstly you can lock the tines in the upright position, increasing safety when driving, particularly on public roads. Secondly, the handling of bales is more effective and safe. When unloading, the bales are pushed into place using the main frame. If unloading takes place at full height, the top bale is pushed into place using the upper section of the implement and without pressing the long tines into the bale. Therefore there is reduced risk of the bale falling back out when you reverse. The Square bale fork can be supplied with two different bottom frames. The 190 cm wide frame is suitable for long large bales. The 140 cm frame is supplied with two tines as standard, but this may be increased to a total of five tines if required. The Square bale fork can be supplied with back extension (for handling several bales simultaneously) or with a bag hook (for lifting big bags) as optional equipment. (Maximum load on the bag hook is 750 – 1250 kg depending on height setting of the lift arm).

Speak to our sales team to find a suitable implement for your requirements.